Part Number: ACDC02-41SEKWA-F01 Super Bright Orange Features z0.2 inch digit height. zLow current operation. zExcellent character appearance. zMechanically rugged. zPackage :300pcs / reel. zGray face, white segment. zMoisture sensitivity level : level 2a. zRoHS compliant. Description The Super Bright Orange device is made with AlGaInP (on GaAs substrate) light emitting diode chip. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01\")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG0227 REV NO: V.8 DATE: MAR/17/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1352000341
芯天下--http://oneic.com/
Selection Guide
Part No.
Dice
Lens Type
Iv (ucd) [1] @ 10mA
Description Min.
ACDC02-41SEKWA-F01
Super Bright Orange (AlGaInP)
White Diffused
21000
Typ. 37000
Common Cathode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD [1] Δλ1/2 C VF [2] IR
Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width
Capacitance Forward Voltage Reverse Current
Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange
Typ. 610 601 29 15 2.1
Max. 2.5 10
Units nm nm nm pF V uA
Test Conditions
IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage
Operating / Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Super Bright Orange
75 30 195 5
-40°C To +85°C
Units mW mA mA V
SPEC NO: DSAG0227 REV NO: V.8 DATE: MAR/17/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1352000341
芯天下--http://oneic.com/
Super Bright Orange ACDC02-41SEKWA-F01 SPEC NO: DSAG0227 REV NO: V.8 DATE: MAR/17/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1352000341
芯天下--http://oneic.com/
ACDC02-41SEKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0227 REV NO: V.8 DATE: MAR/17/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1352000341
芯天下--http://oneic.com/
PACKING & LABEL SPECIFICATIONS ACDC02-41SEKWA-F01 SPEC NO: DSAG0227 REV NO: V.8 DATE: MAR/17/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1352000341
芯天下--http://oneic.com/
因篇幅问题不能全部显示,请点此查看更多更全内容