供应商/Supplier图号/版次DrawingNo./rev.顾客CustomerGP12临时检验计划Interim Inspection Plan零件号Part No./rev零件名称Part Name共 1 页Totel:第 1 页Page:(1)Inspection frequency: 1time for each production batch.检验频次: 1次/生产批(2)Term defination of IIP activity: From dd/mm/yy to dd/mm/yy(SOP+90days as an principle) or as a minimum,1000pcs parts produced with meetingrequirment(3).IIP检验计划执行时间: 自 20XX 年/ 0X月/ XX 日 至 20XX 年/ XX 月/ XX 日 或 生产数量最少6000PCS, 且满足检验规则(3)的要求.检验规则General Rules(3)Criteria to terminate IIP activity: 0 non-conformances for the defined inspection items with a serial 4 batches of production.终结IIP检验的原则: 下表所规定的检验项目连续4个生产批经检验缺陷发生率为0。(4)IIP results and experience shall be used as input to \"lessons learned\" and/or to review and update existing WI,CP,FMEAs and other relevantdocuments.IIP检验的结果和经验应该被作为“经验教训”的输入或是审核和修改现有的工作指导书和FMEA，其他相关的文件。(5)CPK analysis shall show capability above 1.67 for CCs and 1.33 for SCs.CPK能力研究显示CC特性≥1.67，SC特性≥1.33。序号NO.12345678外观 检验项目Items技术要求Spec特性CC/SC检验工具Test facility抽样数量No.ofsamples备注Remark12电性能检测F1F213力学性能检测F3F4Signature/Date签字／日期Prepared by/编制Verified by/审Approved by/批准核