FEDCBAcNOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1mm; PCB THICKNESS 1,6mm10. HEXLOCKING SCREWS: STAINLESS STEEL11. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 212. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB)13. CONNECTOR IS PART MARKED: 15-00055o CONEC ABC0,412,13+-0,30,411,5+-0,3 ( 5 : 1 )DD0,48,6+-0,3c0,176,13+-0,080,253,6+-0b8+-0,230,020,361,4+-0CcC47,04`0,13038,5+-0,250,321,1+-010°n0,65`0,05 (44x)BbSEALING COMPOUNDO-RING15-00055o CONEC ABCBSEE NOTE 139,44,64-40 UNC4-40 UNCcSW 4,8AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATERRESISTANT CAP OR WATER TIGHT HOOD.THIS DRAWING MAY NOT BE COPIED ORREPRODUCED IN ANY WAY, AND MAY NOTBE PASSED ON TO A THIRD PARTY WITHOUTWRITTEN PERMISSION.OWNERSHIP AND COPYRIGHT OF CONEC GmbHAPPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACIONAPPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVALCUSTOMER APPROVAL DATE:DO NOT ALTER CAD DRAWING BY HANDtolerance datedrawnappd.normA NAME:TITLE:dim. in mmnamescale:material:title:2:1 (5:1)APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACIONSEE DRAWING 15K1A297 A17.10.0823.10.08 SchmidtFischerD-SUB FEMALE HD44pos. SOLDER PIN STRAIGHTwith rear spacer clip and hexlocking screwdwg no:Inventor 10DIN-R COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL4 x c2 x baÄ 3435Ä 3419Origin25.09.0902.09.09HSLehm.d-old15K1A297part no:BAA3sh:1 rev.descriptionDdatenameChttp://oneic.com/FE15-00055o (see note 8)FEDCBAP.C.B. HOLE DRILLINGSDD33,147`0,052,286`0,11,143`0,1n3,1`0,1 (2x)16,637`0,16,883`0,031,98`0,11+0,1n0,9-0 (44x)C47,04`0,131,98`0,1CRECOMMENDED PANEL CUT-OUTi0,26A42,5`0,1BBBn3,1`0,05 (2x)11,4`0,1,4R310°`1°i0,26B`0,1347,04`0,1ATHIS DRAWING MAY NOT BE COPIED ORREPRODUCED IN ANY WAY, AND MAY NOTBE PASSED ON TO A THIRD PARTY WITHOUTWRITTEN PERMISSION.OWNERSHIP AND COPYRIGHT OF CONEC GmbHAPPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACIONAPPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVALCUSTOMER APPROVAL DATE:DO NOT ALTER CAD DRAWING BY HANDtolerance datedrawnappd.normd-oldA NAME:TITLE:dim. in mmnamescale:material:title:5:1see sheet 1 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACIONA17.10.0823.10.08 SchmidtFischerP.C.B. HOLE DRILLINGSPANEL CUT-OUTD-SUB Female 44pos. HD Solder pin straightdwg no:Inventor 10DIN-R COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVALaOrigin15K1A297part no:A3sh:2 Arev.descriptionDdatenameCsee sheet 1http://oneic.com/FEB
分销商库存信息:
CONEC15-000553